...成型； 固相体积分数； 粘度[gap=1368]Key words: PTCR chip thermistors; multilayered structure; gelcasting; solids loading; viscosity...
基于20个网页-相关网页
solids loading rate 固体负荷
high solids loading 高固相含量
Optimal solids loading 最佳粉末配比
Solids Loading Limitation 固含量有限制
By using these methods, the viscosity of suspension was less than 0.32Pa. s and green strength was up to 32MPa, which made it possible to machine. Through adjusting the particle distribution the solids loading amounted to 54vol%.
并通过调整粉料的颗粒级配,使悬浮体固相体积分数达到54vol%。
参考来源 - Sialon·2,447,543篇论文数据，部分数据来源于NoteExpress
The effects of stirred velocity, chlorine flow rate, air auxiliary flow rate, solids loading, mean particle diameter and reaction temperature on global process rate are investigated and analyzed.
考察了搅拌速度、氯气流量、辅助空气流量、固体联二脲浓度、粒度及反应温度对过程速率的影响。 分析了影响过程速率的主要因素。
With the increase of solids loading, the particle density increases and the bending strength of green body decreases for the network polymer accounting for only a small amount of the composition.
随着固相体积分数的增加，单位面积的颗粒分布密度增大，网络高分子在成分中只占少量，坯体抗弯强度降低。
Mixed liquor suspended solids increased with the increase of sludge retention times and volumetric loading rates.
污泥浓度随污泥龄的增加、水力停留时间的缩短、容积负荷的增大而增加；
应用推荐